The only F150 Raptor tune on the market with true factory level octane learning!
Is the stock F150 Raptor horsepower not enough to satisfy your curb shredding or mall crawling ambitions? Then its time to get yourself the Monster Tuned Adapt-X tune. Unlock an amazing 100+ HP over the stock tune with a simple ecu flash!
Our Adapt-X line of calibrations are essentially an improved version of the OEM Ford calibration. We start from the OEM stock map and increase the vehicles ability to target higher engine load and torque at wide open throttle. The result is a calibration that maintains the stock OEM feel and reliability. Despite being significantly safer than competitor maps, our calibration allows the vehicle to produce the most power possible, and typically outperforms competitor calibrations.
Specific to the Ford calibration strategy, our Adapt-X tunes work by utilizing the factory octane adjust ratio logic and factory timing model. Our calibration relies on knock based octane learning to get the timing and load targets optimal, then at wide open throttle the car will quickly add in or remove timing using spark based knock advance for maximum power.
Our calibration will support 85 through 94 octane like the stock calibration, however if you are not running 91 or higher you will not see any power gains. We recommend using only premium fuel (91+ octane) in your F150 Raptor.
One of the largest benefits of Adapt-X is that you can continue to modify your vehicle with out changes to your calibration. Adapt-X will support most bolt on modifications. When adding new modifications simply re-flash the calibration or perform a KAM reset using the cobb accessport so that the vehicle can re-learn wastegate, ignition, and airflow parameters stored in the KAM table.
All Adapt-X calibrations are emissions compliant and will pass emissions testing. Removing or tampering with emissions equipment on your vehicle will result in a check engine light and the vehicle failing an emissions test.
Upgrade to Adapt-X and unleash your vehicle’s full potential today.
Adapt-X Calibration Features:
- 100% Ford Refined OEM drivability
- Factory fuel economy performance
- Factory level reliability with inferred octane learning (Only tune on the market with this functionality)
- Improved engine cooling over factory
- Auto Stop/Start Disabled
- TCM tuning included in the price (17-20 requires a TCM license on the COBB AP)
- Less knock over competitor tunes with advanced knock control strategy
- Adaptive boost control strategy designed to be compatible with most bolt on modifications, and more responsive than factory controls
- All the power of a pro tune with out the cost or the turn around time
- 1 month of tuning support is included with the purchase
- Same day tune delivery during business hours after receiving the tuning form response
Requirements:
- RTD4/MPIV2 or higher (Not Included)
- 4 HP Tuner credits or an existing license on the vehicle
- Windows computer
- Premium fuel recommended (91+ octane)
- Stock fuel system (No fuel system modifications or auxiliary fuels like WMI)
Compatible Modifications:
- Intake
- Intercooler
- Downpipes
- Exhaust
- Charge pipes
- BOV or Upgraded BPV
What kind of power should I expect?
The power that you get will be heavily dependent on cooling and fuel quality. We highly recommend keeping the factory airbox (and with the oem lid) or an aftermarket intake with a close airbo (aFe Momentum GT) After market intakes with open air elements may see a reduction in power due to increased intake air temperatures.
Power figures are based on in-house dyno testing with our 2024 10R80 Mustang GT and quoted as crank horsepower numbers. Multiply numbers by 0.88 to get dyno figures.
- Stock: 450 HP
- 91 Fuel: 530 HP
- 93 Fuel: 540 HP
- E30 Fuel: 620 HP
- E30 Fuel: 645 HP
*** Ethanol Mix Notes ***
When mixing always allow 15 miles of driving for the fuel to mix before going wide open throttle. Failure to allow the fuel to properly mix can result in excessive knock.
For E85 pumps that do not state an e70 minimum statement we recommend testing your fuel at least once a month using an ethanol test kit.
*** Computer Required ***
This product requires basic knowledge of how to install an application to your windows computers.
If you are not comfortable with using a windows computer to install hptuners vcm suite, create datalog configs, and send datalogs by email, please do not purchase this product.
By purchasing this product you have fully read and agree to our Store Policy.
*** Please note that all tune sales are final. Tune and device sales are non-refundable after ordering. ***